top of page
Used Equipment Available
March-April 2020
Used Equipment: Welcome
Slitting Lines:
Torrington: 305mm x 1.5mm x 2 Ton, 406mm ID’s, complete, updated controls, cheap
Ruesch: 457mm x 1.5mm x 2 Ton, 406mm ID’s, complete, two (2) Slitter Heads, excellent condition
Ruesch: 610mm x 1mm x 11 Ton, 406mm ID’s, complete, two (2) Slitter Heads, excellent condition
Seco: 610mm x 2.3mm x 3 Ton, complete, driven head, for Stainless Steel, under power
Waterbury: 610mm x 3.2mm x 3 Ton, compact, cheap, Uncoiler thru Recoiler, 303mm ID’s
Nash: 610mm x 3.4mm x 8 Ton, Excellent condition, driven Slitter Head, Multiple Recoiler ID’s
Chicago: 762mm x 2.3mm x 8 Ton, complete, for HSLA up to 723,949,515.78 Newton/square meter, 406mm ID’s
Yoder: 914mm x 2mm x 7 Ton, pull thru, good condition, 406mm ID’s, inexpensive, built on floor mounted sub-frame
Georg: 1041mm x 2.5mm x 7 Ton, fully loaded with Turret Recoiler, specially built for processing Transformer stock
Dahlstrom: 1220mm x 2mm x 5 Ton, driven, complete, excellent condition, under power
PM/Wean: 1220mm x 2mm x 13 Ton, for painted metals, two (2) Injector Heads, under power
Yoder/Loopco: 1220mm x 2.8mm x 9 Ton, 406mm ID’s, two (2) Slitter Heads, in storage
Stamco/Seco: 1220mm x 2.8mm x 18/13 Ton, Entry Coil Car thru banding Line, Looping
MDKF: 1525mm x 3mm x 18 Ton, new in 1991, complete, Driven Head, in storage
Stamco/Herr Voss: 1525mm x 3.2mm x 28 Ton, Entry Turnstile thru Exit Turnstile with Injector Heads, 330MPM
Loopco: 1525mm x 5mm x 22 Ton, complete, Entry Coil Car thru Exit Coil Car, Two (2) Driven Heads, under power
B&K: 1525mm x 6.3mm x 22 Ton, Complete, Entry Turnstile thru Exit Coil Car, two (2) heads, under power
Kampf: 1753mm x .51mm x 2 Ton, complete for Aluminum Foils/Sheet, excellent condition, under power
Bradbury/ Cincinnati Forte: 1830mm x 3.5mm x 18 Ton, Entry Coil Car thru Exit Turnstile, two (2) Heads
Loopco: 1830mm x 6.3mm x 18 Ton, complete, Entry Coil Car thru Recoiler, two (2) Driven Heads
Paxson: 1830mm x 9mm x 22 Ton, complete, Entry Coil Car thru Exit Turnstile, two (2) Driven Heads, New Drives
Used Equipment: Services
Cut to Length and Levelling Lines
Used Equipment: Services
Regal: 915mm x 1.3mm x 2 Ton, complete with Flattener, Shear, Runout Table and Upender
Iowa Precision: 915mm x 1.9mm x 9 Ton, SLEAR with Punching and Notching Stations
Georg: 1020mm x 2.2mm x 2 Ton, for Transformer Cores, complete, excellent condition, under power
Progressive/B&K: 1220mm x 1.5mm x 9 Ton, complete, under power, 6HI Corrective Leveller
Redbud: 1525mm x 1.5mm x 6 Ton, Herr Voss 4HI Corrective Leveller
Iowa Precision: 1525mm x 1.5mm x 9 Ton, SLEAR 1, 2004 with a Stacker that was new in 2013
Emag: 1525mm x 1.9mm x 8 Ton, Multi-blank Line / SLEAR, excellent condition, complete, under power
Sesco: 1525mm x 2mm x 9 Ton Servo Feed Line, 4HI Herr Voss Corrective Leveller, Metform Stacker, excellent condition
McKay: 1525mm x 2.2mm x 9 Ton, complete with 4HI Leveller, under power.
Rowe: 1525mm x 3.2mm x 9 Ton, complete with a 6HI Herr Voss Corrective Leveller.
Redbud: 1525mm x 3.2mm x 18 Ton, Herr Voss 4HI Corrective Leveller, Grip-feed, complete
UMI/Herr Voss: 1830mm x 2.7mm x 23 Ton, Complete with 5HI Leveller, Wash Section, 275 Ton Press
Braner: 1830mm x 6.3mm x 23 Ton, complete, excellent condition, looping with 4HI Corrective Leveller, 12m Stacker, under power
Herr Voss: 1830mm x 12.7mm x 27 Ton, under power, 4HI Corrective Leveller, 8m Stacker
Herr Voss: 2440mm x 8mm x 18 Ton, complete, built for 8mm Stainless Steel and 9mm Bright Aluminum, 5HI Leveller.
Paxson: 2440mm x 12.7mm x 36 Ton, complete, two (2) Corrective 4HI Levellers, 50’ Stacker, under power
Delta: 2440mm x 14mm x 30 Ton, complete, 14mm Flattener, 12.7mm Corrective Leveller, Edge Trimmer in storage.
Misc. Lines and Equipment
Babcock Copper Conform Line for Transformer manufacture
Babcock Aluminum Conform Line for Transformer manufacture
Transmission/Tapered Pole manufacturing plant with Cut to Length Line
50mm OD x 2.5mm Wall x 2 Ton ACE Tube Mill, High Frequency Welder, Tooled for Rounds/ Squares, new in 1993
76mm x 3.2mm Tishken Edging Line (needs to be rebuilt)
Bradbury QTR Roll Former, tooled for C, Z, U and Angle
457mm x 3.2mm Waterbury Temper Mill, 2 HI for Stainless Steel
610mm x 3.2mm FPE Continous Galvanizing Line, new in 2002, under power
630mm x 2mm Bruck Coil to Coil Perforating Line
762mm ASL/Ramco Coil to Coil Stainless Steel Polishing Line
940mm x 3.2mm x 6 Ton Waterbury Farrell 2HI Skin Pass Mill
1220mm x 1.3mm x 10 Ton Herr Oscillate Winding Slitting Line, sixteen (16) Recoilers
1300mm Sendzimir Mill, 6.3/.23mm, 762MPM, new in 1992
1320mm x 10mm 2HI Blaw Knox Reversing Mill, installed, needs new Electronics
1500mm x 2.8mm Yamatsu Sheet Slitting System
1525mm x 3mm IMEAS Sheet Polishing Line
1525mm x 2 Ton Banding Line, Signode M20 Strapping Table
1525mm x 9mm x 28 Ton Divimec/Fagor Pickling Line, under power, new in 2009
1625mm x .6mm x 7 Ton Herr Voss/ Stamco Aluminum Tension Leveling/Slitting Line, under power
1676mm x .5mm x 14T Pittsburgh Rolling Mill, 4HI, for Aluminum Foil
1830mm x 2.7mm Herr Voss Corrective Leveler, 4HI, completely rebuilt, new controls
1830mm x 6mm SMS Demag, Tension Leveler Assembly, new in 2007, never installed
Knudson Stud Lines, two available
533mm x 508mm Hydra-Mech Horizontal Band Saw
Used Equipment: Services
bottom of page